Electro Depot Logo
          
Wireless Controls & Automation
Wireless Controls & Automation
  HomeHome Contact Cart Shopping Cart   Site Map
   
    Electronic water detector
Model: 930660
Electronic water detector

  930660    $159.99    

 

 

Order from Amazon

Features
Electronic control relay for detecting a rising water level. Inside a waterproof enclosure they have a medium-power relay, which are operated by water reaching the trip level, and can be used to control alarms or other equipment. The relay is normally energized when the power supply is switched on and no water is present. When water rises up the side of the box to reach the switching level, the relay drops out. This sequence is failsafe, allowing each model to be used as a water spillage alarm switch or to turn off a valve or stop an air conditioning unit before the water overflows its containment.
.
Specifications  
     
    Electronic Water Detector
  • Small enough to be used in restricted spaces
  • Water detection with accurate switching level
  • All components encapsulated against moisture ingress
  • Size: 2" (5.0 cm) W, 1.25" (3.1 cm) D,  1.2" (3 cm) H
  • Switch-off height 0.43" (1.1 cm)
  • Switch-on reset 0.31" (0.8 cm)
  • Switching capability 5 amps at 250 VAC
  • Power supply  24 VAC/DC  1.Watt
  • Cable length 20inch, 5 core 16/0.2 21 AWG
     
    Electronic Water Detector Special characteristics

Protection IPX7
Temperature:
Air: 0-70C / 32-158 F
Water: 0-50 C / 32-122 F
Switch On /Off Level
ON: 10 mm typical, 6 mm, 14 mm max
Hysteresis: 2 mm
Delay on level fail: 3 Second


  

.
     Copyright   Electrodepot. All rights reserved