Compact solid-state design
energy saving
-
Reduce maintenance requirements to
help improve uptime
-
High resistance to shock/vibration, contamination,
and wear
-
Built-in varistor protection, over-voltage protection
-
Zero cross switching to help reduce EMC emissions
-
LED status indication provides visual verification
of operating status
Flexible configuration options
-
DIN Rail and panel mounting for quick and easy
installation
-
1, 2, or 3-phase controller,
-
Wide range of AC, DC, and analog control input
options
Optimized to help reduce electrical costs and needs
-
Low electrical and acoustical noise
-
Low input power
-
Operational current up to 100 A (AC-1), 40 A (AC-3)
-
Line voltage ratings up to 600V
-
Operating temperature
-30 to 80 degree Celsius
-
UL/cUL as a motor controller
|
 |
If your
application demands low maintenance, fast switching,
no noise, or operation in harsh environmental
conditions, The EDSS® line of solid-state
contactors, Designed without moving parts or
contacts that can wear out, solid-state solutions
can help reduce or eliminate the cost associated
with maintenance, part replacement, and downtime. |
Specifications
|
Isolation |
4000 volts |
|
I²T
fuse |
Models
75,100 SS1 include: large power terminals for 3-8
AWG wires; a built-in replaceable I²T fuse; and two
red diagnostic LEDs for fuse open and
over-temperature shutdown |
|
Turn-on time |
<8.3 ms at 60hz |
|
Turn-off time |
<8.3 ms at 60hz |
|
Control Terminals |
Will accept #24-#10
AWG wire. Torque: 7-9 inch lbs. |
|
Power
Terminals |
Will accept #8-#3 AWG
wire. Torque: 40 inch lbs. |
|
Installation |
Leave a minimum of
one inch below and 4 inches above these contactors
for air ventilation. Leave one inch horizontally
between units for ventilation. |
|
Home 
Checkout
Support 
