Electrodepot

 


   
    Medium Range Remote Digital    2 Channel RECEIVER  
Model: 936002

 $99.99
Compatible products


Power Relay

AC Adapter

Optional panel-mount antenna

General Specifications

    700 Feet of Line-of-Sight  with optional panel mount antenna
Operating Frequency: 315 MHz,   Data Format:  DX
Number of Codes: 1,048,575
Channels: TWO  channel
Measured Range: 700 feet in one quadrant with 1Ch  4Ch  8Ch  Door/Win transmitter
Operating Temperature: 32° to 140°  F (0° to 60° C)
Sensitivity: -95 dBm (typical)
Number of Stored Transmitter  32 Codes: per receiver
Receiver Output: For "C" relay contact, 1 amp, at 32 VDC per channel  Power Relay
Field Selectable Receiver Output Modes: Momentary, four seconds (factory set)
Momentary, one second
Flip-flop toggle or  latch, 4-Channel only 
SR 4Ch Receiver
MODE BUTTON (one per channel) Learn Mode:     Press and release to enter learn mode
Transmitters Learned: Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel
Clear Low Battery: Press and release mode switch on channel  (936004 only) to clear low battery
LED INDICATOR   Steady: Indicates "learn" mode
                            Flashing: Indicates number of transmitters learned on the selected channel
RF Activity: Blinks synchronously with detected RF activity
Antenna: Wire lead, Optional external antenna kit
Input Impedance: 75 Ohm - 2:1 VSWR
Operating Voltage: 11 to 17.5 VDC - 12 to 16 VAC
Current: 25 mA at standby at 12 VDC     60 mA in alarm at 12 VDC
Connectors: Screw terminal,+,-, with N/O, N/C, and common per receiver channel
Dimensions: 5.5 in L x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna
Accessories: Mounting bracket, screws, and anchors (supplied)
Regulatory Requirements: FCC and DOC
 

Warning: Radio control equipment in not to be used in life safety.
    
.
   
     Copyright © 1996- 2009 Electrodepot. All rights reserved