Current Date and Time setting  

                           YEAR / DAY / MONTH /  HOUR : MINUTE

Press PRG and hold until SEt 1  shows up

Press PRG again SEt 2 shows up    

Press   OK   a   2000  number will show up

To  Enter  to actual  year  press  PRG  for year up 2001 
 or   MAN  year down

When selected year 2010 shows up press OK

Two digit 00: Day will show up  press  PRG  or  MAN for for day  When selected day shows up press OK

Two digit 00:00 will blink after the date,  to Enter the month

Press   PRG  or  MAN  for month  When selected month shows up press OK

Now a 24  will show up  Enter 24 or 12 hour clock format

Press  PRG  or  MAN for  time format, then press  OK

NOTE  when 12 hour format is selected you will get a AM or PM display on the right of the screen.  watch for, when setting your hours

Two digit will blink 00: will show up  to Enter Hour

Press  PRG  or  MAN for  hour  and format
     make sure AM or PM is appropriate in the 12 hour format selection.

When selected hour shows up press OK

Two digit will blink  after the hour digit 00: 00 will show up  to Enter minutes

Press  PRG  or  MAN for minutes   When selected minutes shows up press OK

Now OFF  will show up, set summer time saving

Press PRG  to set ON   for automatic summer set activation, Then press OK

SEt 2 will show up,   now press   ESC

             Now  hour and minutes will show up  00:00

            To check your time   press OK  to scroll across your time and date

Program a time schedule     ON schedule example                 

Press PRG and hold until SEt 1   shows up

Press OK    Add will show up

Press OK    PR00 shows the program number your are about to enter 

Press OK    dAY will show up   for daily  setting

 NOTE  you may select dAY  or YEAR   by  pressing  PRG  or  MAN

  dAY  is used for regular weekly schedules, YEAR for a specific Date in a given year month and day

Select dAY  and press OK

Screen will display  Out   and a small  On will show up  in the screen press OK

 Two digit  00: for Hour will blink on the screen select hour
pressing   PRG  or  MAN

Make sure for status AM or PM in the 12 hour format selection. note the PM or AM display on the right of the screen

When selected hour show up press OK

Two digit will blink  after the hour digit 00:00 will show up  to Enter minutes

Press  PRG  or  MAN  When selected minutes show up press OK

YES  will blink on the screen  for each day of the week ( for the operation on this day  select YES)

A number for the day of the week 1  2  3  4 5 6 7  will be displayed at the top of the screen   Press OK  for every  YES   ( this if ON for  this day )

 Or  select YES  or NO by pressing PRG  or  MAN,  When you select NO The timer will not register this day of the week for the ON schedule.

One by one OK, When all 7 days are selected press OK 
ADD  will show up,   Continue to setup the OFF Schedule                       

           OFF schedule example

Press OK    PR01 shows the program number your are about to enter

Press OK   dAY will show up   for daily  setting

 NOTE  you may select dAY  or YEAR   by  pressing  PRG  or  MAN

    dAY  is used for regular weekly schedules,
    YEAR for a specific Date in a given year month and day

Select dAY  and press OK

Screen will display  Out  and a small  Off will show up  in the screen press OK

Two digit  00: for Hour will blink on the screen,  Enter hour pressing  PRG  or  MAN

     Make sure for status AM or PM in the 12 hour format selection.

When the selected hour show up press OK

Two digit will blink  after the hour digit 00: 00 will show up  to Enter minutes

Press  PRG  or  MAN    When you selected minutes show up press OK

YES  will blink on the screen  for each day of the week

A number for the day of the week will be displayed at the top of the screen for every YES

Press OK  for every  YES ( for the operation on this day  select YES)   Or  select NO by pressing PRG  or  MAN

When you select NO The timer will not register this particular day of the week for the OFF schedule.

One by one OK, When all 7 days are selected press  OK   
ADD  will show up then  press ESC,  ESC  twice 

                                This ends  the ON/OFF schedule

To  RESET all Programs 
Press PRG and OK simultaneously until the display shows ALL Then press OK to confirm.